RSW Segmented Wave Turbo Hot Sintered - For Wall Cutting & Grooving

1. This RSW wave turbo hot-sintered diamond blade adopts proprietary guard-tooth protection design, engineered for heavy-duty dry wall grooving and cutting for C40-C80 reinforced concrete, brick and hard granite.
2. Unique wavy turbo segmented geometry delivers optimized airflow and rapid debris evacuation, greatly reducing thermal buildup for continuous dry cutting and improving blade durability compared with conventional straight turbo segments.
3. Integrated guard tooth structure shields diamond segments from impact abrasion during deep grooving, prevents premature segment wear when encountering steel rebar and wire mesh.
4. Hot sintered metallurgical bonding creates ultra-strong adhesion between diamond grit and matrix, maintaining stable sharpness; anti-jamming profile enables smooth cutting through dense rebar networks.
5. Precision flattened steel core controls blade runout, lowers vibration, offers clean consistent groove lines, and supports re-sharpening to extend usable service life.

1. Blade diameter by cutting depth: BD-RSW-0158/0168 (158-168mm) for handheld wall chasers on 25-35mm deep electrical and plumbing grooves; BD-RSW-0195 (195mm) for mid-size wall chasers on 35-50mm channels; BD-RSW-0210/0230 (210-230mm) for deeper grooving up to 60mm on renovation and demolition work.
2. Segment width by wall type: 1.9mm narrow segments suit brick walls, cement masonry and lightweight panels for clean narrow grooves; 2.0-2.3mm wider segments handle C40-C80 reinforced concrete and hard granite where chip evacuation and groove stability are critical under dense rebar loads.
3. Equipment compatibility: the standard 22.23mm arbor fits common wall chasers, angle grinders and concrete cutters; the 17mm segment height is nearly double standard 7-10mm wall chaser blades, delivering extended working life and supporting re-sharpening before replacement.
4. Dry-cut result: the wavy turbo guard-tooth design runs dry without water, reducing heat buildup and preventing jamming when cutting through rebar and wire mesh; it produces straight, clean groove edges ready for conduit installation on both brick and high-strength concrete.

Multiple bore diameter and tooth count options available to match your cutting machine.