RTF Mesh Turbo Hot Sintered - For Ceramic Tiles

1. Mesh turbo rim: the open mesh pattern increases airflow and dust evacuation around the cutting edge, keeping the blade cooler and cutting faster than plain turbo or continuous rims, with smooth chip-free results on brittle glaze.
2. Hot sintered technology: high-temperature sintering bonds the diamond matrix uniformly for higher diamond retention, continuous self-sharpening and much longer life than electroplated blades.
3. Special steel core: the precision-tensioned core resists heat warping and vibration during continuous dry or wet cutting - no deformation, no burning teeth, stable cutting feel.
4. 10mm segment height - 25% taller than standard tile blades - extends service life for long production runs; the 115-230mm size range covers most angle grinders and tile saws.

1. Blade diameter by job: BD-RTF-0115 (115mm) for angle grinders on ceramic tiles and trim work; BD-RTF-0125/0150 (125-150mm) for angle grinders and small tile cutters on polished and full-body tiles up to 600mm; BD-RTF-0230 (230mm) for large electric tile saws on large-format tiles, sintered stone slabs and microcrystalline stone.
2. Mesh turbo advantage: the mesh openings speed up cooling and slurry removal versus a closed turbo rim, letting the blade keep its sharp bite through long cuts; the thin 1.4-1.8mm kerf leaves a cleaner edge with less waste on polished tile and rock plate - no edge breaking, smooth cutting feel.
3. Arbor matching: 22.23mm bore on all 115-230mm models fits angle grinders and electric tile saws directly (reducer rings available for other spindles).
4. Cutting result: fast, smooth cuts with no edge breaking on high-hardness ceramics; the 10mm hot sintered segment holds its shape through long continuous runs, delivering a finished edge ready for grouting or butt-joint installation.

Multiple bore diameter and tooth count options available to match your cutting machine.