BSG Brazed Silenced Saw Blades - For Granite Cutting

1. Silenced core technology: the core is laminated with a copper damping layer sandwiched between steel layers, absorbing vibration and suppressing the resonance that makes standard blades scream - significantly reducing noise levels in granite fabrication shops.
2. Brazed segment construction: the segments are brazed to the core for a secure, heat-conductive bond, keeping the 15-20mm tall segments firmly in place through long slab-cutting runs.
3. Granite-optimized bond: the diamond matrix is tuned for hard granite and natural stone - free cutting without glazing, with clean edges on slabs and countertops.
4. Large-format coverage: 350-600mm diameters with 60mm arbor match standard stone bridge saws, with 15mm and 20mm segment height options (500mm and 600mm) to balance cost and total cutting life.

1. Blade diameter by machine: BD-BSG-0350/0400 (350-400mm) for small and medium bridge saws on granite slabs and countertops; BD-BSG-0450 (450mm) and BD-BSG-0500 (500mm, available in 15mm or 20mm segment height) for standard bridge saws on large slabs; BD-BSG-0600 (600mm, 15mm or 20mm segment height) for large infrared bridge saws on extra-thick and extra-wide stone.
2. Silenced blade advantage: in fabrication shops running multiple saws, the copper-damped core noticeably reduces overall noise exposure - easier compliance with workshop noise regulations and less operator fatigue.
3. Arbor matching: 60mm bore is the standard stone industry spindle size - fits most bridge saws and stone cutting machines directly; reducer bushings available for smaller spindles.
4. Cutting result: smooth, stable, low-noise cutting of granite, marble and other natural stone slabs; the 15-20mm segment height delivers maximum total square meters per blade, and the stiff silenced core keeps cuts flat and chip-free on polished slab surfaces.

Multiple bore diameter and tooth count options available to match your cutting machine.