RSA Segmented Hot Sintered - For General Purpose Cutting

1. RSA segmented hot sintered diamond blade is a multi-purpose cutting disc for brick, block, stone, cured & reinforced concrete, suitable for angle grinders and cut-off saws.
2. Segmented hot sintered segments provide better heat dissipation than continuous rim blades, reducing segment wear during long dry cutting work.
3. Wide segment gaps quickly remove cutting debris, maintain sharp cutting speed and avoid blade binding on hard masonry materials.
4. Supports dry and wet cutting, available in multiple diameters with standard arbor hole for flexible use in general construction jobs.

1. Blade diameter by job size: BD-RSA-0110 to BD-RSA-0125 (110-125mm) for angle grinders on tile, brick and thin masonry; BD-RSA-0150 to BD-RSA-0230 (150-230mm) for hand-held cut-off saws on concrete block, stone and general masonry; BD-RSA-0300/0350 (300-350mm) for stone cutters and mid-size saws on concrete slabs.
2. Segmented gullet advantage: the open gullets clear chips and dissipate heat faster than continuous rim blades, suiting RSA for cured concrete, reinforced concrete and block where chip evacuation matters; hot-sintered bonding keeps segments secure through extended cutting.
3. Arbor matching: 20mm or 22.23mm bore on 110-230mm blades fits angle grinders and hand-held saws; the 20mm bore on the 300mm model and 25.4mm bore on the 350mm model match common stone cutters and road saws.
4. Cutting result: hot-sintered segmented construction runs both dry and wet; delivers reliable general-purpose cutting on brick, block, stone and concrete for renovation and on-site masonry work.

Multiple bore diameter and tooth count options available to match your cutting machine.